Easy Nzxt h510 Fan Setup Guide

Easy Nzxt h510 Fan Setup Guide

Would you like to put fans in your NZXT H510 but are unsure how to do so? You can set everything up and master the PC construction in five simple steps.

In most cases, the NZXT h510 comes with two pre-installed fans. If the two fans are insufficient to keep your CPU cool, you can add additional.

Here you can find all the necessary details for a proper nzxt h510 fan setup. Please read this article for further information and suggestions.

Complete Nzxt h510 Fan Setup Guide

The NZXT H510 is equipped with two fans. Some people, however, may choose to relocate them or add additional fans to their computer’s CPU.

This case must be understood before installing a fan on the NZXT H510. You’ll need to know how many fans you can install, where you can put them, and how they’ll be configured.

How Many Fans Does NZXT H510 Require?

Nzxt h510 Fan Setup

You can install up to four fans in the NZXT H510. Fans can be mounted on the front of the casing; the H510 uses 2 120/140 mm fans that aid in the reception of cool air.

Another fan can supplement a 120/140 mm fan. It will aid in the removal of hot air and the regulation of temperature. A 120/140 mm case fan can also be mounted at the pinnacle.

What is the Best Location for the Fans to be Installed?

A bracket mount with fasteners on the rear and front can be found within the casing.

To install the fan, unscrew the screw and unmount the bracket. The interior top of the casing can be fitted with a fan.

What are the Best Places to Make Connections?

Fans can be connected to the motherboard straight or through a connector to the power supply unit.

If you’re looking for a way to connect your case fan to your motherboard, look through our article on connecting case fans to motherboards, regardless of connector pins.

How Should A NZXT Fan Be Mounted?

You should also be aware of the fan mounting angle. The front-side fan pulls cool air in from the outside, while the back-side fans push heated air out.

The top-mounted fans are vent fans, while the side-mounted fans are inlet fans.

How to Setup NZXT H510 fan

The setup of the NZXT H510 fan is not difficult. To set up the fans, follow the directions below.

  • Step 1: With the use of a screwdriver, open the case and insert a fan.
  • Step 2: On the front side of the issue, there are brackets mounted with thumbscrews. Remove the bracket by unscrewing it.
  • Step 3: Attach a 140/120mm fan to the case in the orientation of airflow inflow.
  • Step 4: Leave the cable uncovered and ensure it doesn’t become caught underneath the motherboard.
  • Step 5: Use the thumbscrews to secure the fan to the casing.

Pointers to Follow When Setting Up an Nhzt h510 Fan

  • It’s critical to set the fans in the proper direction. Stickers on fans usually indicate the circulation direction.
    The angle of the fan’s blade curve reveals the fan’s inclination. An arrow on the fan also indicates the path of airflow.
  • Inspect all of the connections. The fans may not function if there are any slack joints.
  • Double-check that the connections are attached to the headers in the proper sequence.

Which Fan Configuration Is Good For The NZXT H510?

Pre-installed fans at the back and front of the NZXT H510 Elite. The optimal location for the ventilation systems NZXT H510 is at the top, in the back. The front fan is the most effective at pulling cool air in from the outside.

How Many NZXT H510 Fans Do You Need?

The NZXT H510 consists of two fans already fitted. For the NZXT H510, I believe it is sufficient.

However, if you need additional fans to cool the inside of the case, the NZXT H510 can accommodate up to four fans.

Is the Airflow of the NZXT H510 Great?

We consider it among the best Laptops cases available, and NZXT has recently released a new version with improved ventilation.

The NZXT H510 Flow, as its title indicates, concentrates on boosting the quantity of air that can be sucked into the case with minimal effort from the fans.

Are the Fans on the NZXT H510 Inlet or Air Filter?

In most circumstances, one side is designated as the inlet side and the other as the emission side.

The NZXT H510 fans in the front of the case normally pull air in while the fans in the back push it out. As hot air rises to the top of the casing, the top fan acts as an air vent, blowing the air out.

Related Questions

Is the airflow of the NZXT H510 good?

We consider it one of the best PC cases available, and NZXT has recently released a new version with improved ventilation. The NZXT H510 Flow, as its name suggests, focuses on boosting the amount of air that can be drawn within the case with minimal effort from installed fans.

Is the NZXT H510 equipped with sufficient fans?

Two 120mm 3 pin rifle bearing fans with airflow are included with the H510. If you purchase additional fans from NZXT, they will be four-pin Fluid Dynamic fans with airflow and static pressure options.

Is NZXT compatible with Corsair?

NZXT HUE+ is only compatible with AER RGB fans. A CORSAIR RGB Fan LED Hub and a CORSAIR Lighting Node PRO are required for RGB LED lighting. Both come standard with all LL Series RGB fan kits or can be purchased separately.


Do you already understand how to install the NZXT h510 fan? Your computer’s CPU generates heat while it works.

Because too much heat can harm your CPU, keeping the inner surface temperature as low as possible is critical.

The NZXT H510 cases receive more heat than any of the other cases. You might have to add extra case fans to your NZXT H510, particularly if you are a hardcore gamer or a pro editor.

It will be beneficial to you if you understand this. The instructions for fan setup may be found in the NZXT H510 handbook.

Nevertheless, we have explained the NZXT h510 setup guide point by point for you to the motherboard on this page. We hope this makes it simple for you to set up the fans.

We believe that this article was of great help to you and as such would implore you to share it across your social media pages and engage us in the comment section if you’ve further questions.

Related Posts: